On demand. On time.

Improved manufacturing ability bending check

22-06-2020

What is manufacturing ability check?

The drawing check is an important step in our production process, where drawings will be adjusted into high quality sheet parts.
 In some cases the uploaded drawing cannot be produced according to our bending guidelines.
The manufacturing ability check provides feedback to the customer with a possible solution for the drawings of the product. 

 

The reason for development

The way in which you order with us will slightly change. Instead of waiting a few days for the feedback if the parts are accepted, you will be able to see right away if the parts are accepted after placing the quotation.
You will be informed right away through a short report in which you can find possible solutions to adjust your drawings.

 

The manufacturing ability check will be used for:

- Minimum leg size
- Minimum Z-bend
- Minimum distance between two bending lines
- Maximum minimum bending angle
- Holes too close to the bending line

 

PLEASE NOTE:Other Bending Guidelines will be checked manually, you will receive a pdf file as usual. It is still important that the requests comply with the bending guidelines of 247TailorSteel! These can be found on our website under the following link.


Want to stay informed about 247TailorSteel?

Newsletter

Sign up for our newsletter and we will deliver all of the ins and outs directly to your inbox.

LinkedIn

Follow us on LinkedIn to receive all of the news, hot off the press, right on your LinkedIn timeline.

247TailorSteel on LinkedIn >>

Facebook

Follow us on Facebook and see all of our news, hot off the presses and straight to your Facebook timeline.

247TailorSteel on Facebook >>

Vertaling lgsz.mapopup.title niet gevonden

Vertaling lgsz.mapopup.text niet gevonden

Vertaling lgsz.mapopup.cta niet gevonden